İncircioğlu Vantilatör Klima İmalat Ltd. Şti.
HOME    ABOUT US    MAPS    CONTACT

Ada Göre Sırala İncelenme Sayısı Eklenme Tarihi
 

 

 

 

CTP Series

Volume Flow : 500 - 35,000 m3 / h

Pressure : 10 - 120 daPa
 
- Low pressure ventilators
 
- Direct drive
 
- Backward curved blades
 
Used for : Air aspiration, assembled on roof or on top of chimneys.

 

 

Volume   : 50 - 18000 m3 / h  

 

Pressure : 0 - 1150 daPa

 

-    Direct coupled motor


-   
Backward curved blades


-   
Location and ease of mounting

 

Place of Use :  Air aspiration, the main fans with channels to help.

Volume Flow     :     500 - 1800 m3 / h


Pressure           :     100 - 200 daPa


Used for : Collecting and storing any kind of dust, timber shavings, granular plastic, timber dust and sand paper dust etc. in its reservoir. It recycles clean and dust free air back to the environment by the assistance of its filter. Special dust collectors can be produced depending on place of usage alongside with standardized machines.

Volume Flow     :     3,000 m3 / h


Pressure           :     250 daPa
   

Collects and stores any kind of dust, timber shavings, granular plastic, timber dust and sand paper dust etc. in its reservoir. It recycles clean and dust free air back to the
environment by the assistance of its filter.

 

Customized single or group cyclones, mechanic filters and jet pulse filters which are suitable for any kind of material can be produced depending on your project’s demands.
 

 
 
Various capacities and specialty ventilators can be produced for special demand. These ventilators can be produced by using different materials such as radial ventilators steel alloy, stainless steel, aluminum, aluminum alloy, plastic, rubber, epoxy covering and etc.

 

 
Volume Flow : 750 - 150,000 m3 / h
 
Pressure : 10 - 250 daPa
 
These units are produced in accordance with place of usage and demand. Forward curved or backward curved blades and heat / noise insulation can be used according to demand :
 
- Aspirator (suction) unit
 
- Mixer unit
 
- Filter unit
 
- Exhaust unit
 
- First cooler unit
 
- First heater unit
 
- Humidifier unit
 
- Cooler unit
 
- Heater unit
 
- Ventilator unit
 
 
Used for : Ventilating, heating, cooling in industry (textile, chemical, medicine, etc.) and comfort facilities (movie theaters, hotels, hospitals, restaurants, schools, office etc.).

 

Please contact us for our scrubber units.

Volume Flow: 100 - 100,000m3/h                   
                   
Pressure: 0 - 3500Pa                   
                   
 - Low and average pressure ventilators                   
 - Different drives can be produced                    
(direct drive, belt drive, coupling drive, etc.)                   
 - Backward curved blades                   
                   
Used for: Polypropylene fans developed especially for use in corrosive gases, humid and                    
polluted air, alkali gases and environments where corrosive smoke exist.  These type of                    
polypropylene fans offer a realistic alternative to stainless steel and nickel alloy steel.                     
Please contact us for more details.   


1 2 3
 
Home  |  News  |  About Us  |  Product List  |  Our Partners  |  References  |  Contact
All Rights Reserved © 2024 - İncircioğlu Vantilatör Klima İmalat Ltd. Şti.    Web Desing: Vizly.Com
 
Hizmet Sahasında Yer Alan Güvenlik Kameraları Hakkında Aydınlatma Metni

Çerez Kullanımı Aydınlatma Metni